Energy-saving and environmentally friendly air conditioners, also known as transpiration chillers, DC blowers are a transpiration cooling ventilator group that integrates cooling, ventilation, dustproof, and deodorization. Environmental protection air conditioning in addition to enterprise workshops, public places, trading and entertainment places to bring new air and drop temperature, there is an important feature-energy saving, environmental protection! It is a brand-new environmental protection product without compressor, refrigerant and copper tube. The main component center of DC blower-transpiration wet curtain (multi-layer corrugated fiber composite) and 1.1KW main motor/is 8/1 of the power consumption of traditional central air conditioner, which can save electricity for various professions. Energy-saving and environmentally friendly air conditioners are used in open and semi-open environments, and can directly transport natural wind and cold wind after cooling. The outdoor novel air is filtered and cooled by the transpiration type cooling machine of the energy-saving and environment-friendly air conditioner, and then transported to the indoor source from time to time. The indoor air with peculiar smell, dust and pure and hot air is discharged outdoors. At the same time, it is used for various functions such as air exchange, cooling and adding fluorine content in the air. It is especially suitable for high temperature and crowded areas. The water pump draws the clean water in the water tank without interruption and sends it to the wet curtain evenly through the water heater.
When the outdoor air is attracted by the powerful electric fan and passes through the transpiration heat exchanger, the water-soluble peculiar smell and dust in the air are filtered and washed to the water tank by the water flow. The high-speed airflow passing through the wet curtain forces the water to rapidly transpiration, and then absorbs a lot of heat energy nearby, causing the temperature of the airflow to drop rapidly and outputting a strong low-temperature novel airflow. The low-temperature and clean cold air flow is pressurized by the high-pressure scroll of the fan and sent into the room through the pipeline. Because the density of the cold air flow is higher than that of the hot air, when the cold air flow meets the hot air, it sinks quickly, occupying the original direction of the hot air, while the low-temperature cold air flow that enters from time to time continuously occupies a lower height in the space, making the area adhere to the comfortable and attractive temperature, humidity and fresh wind. The environment-friendly air conditioner shall be installed outdoors, requiring fresh air movement, and the return air method shall not be used.
With the rapid popularization of solar water heating project, the matching products have also been bulging up. The most popular thing to do is the solar water heating system control equipment. The solar water heating engineering control system is composed of controller, photothermal conversion equipment, temperature and water level signal collection equipment, solenoid valve and so on. As the brain of the solar hot water project, that is, the controller of the control department, because it is a derivative of the solar hot water profession, like many new professions, the national norms lack experience in management, demand experience is piled up, and professional management is improved from time to time. The solar hot water system control equipment came into being under this big scenery. As the DC blower control equipment is only a supporting product in the solar energy application profession, and its value is not high, and the after-sales maintenance is time-consuming and expensive, rare enterprises have stopped studying and applying the specifications of the solar energy control system. After more than ten years of development of the solar hot water engineering control system, the high repair rate of the engineering control system constitutes an increase in the after-sales service cost of the enterprise. The reason is that the electrical gap and creepage interval of the solar water heating engineering control system are not enough. According to the experience of white goods, we will discuss the national standards, check and supply the data, improve the electrical safety planning of the solar hot water project control system, the various functions of the traveling products, the landing repair rate, and the occupancy rate of the traveling shopping mall.