Generally correct installation
DC FanConducive to the heat dissipation performance of the product, including the installation direction, wind direction, location, distance from the heat dissipation product and other factors, the same DC fan, due to the installation is different, the performance of the heat dissipation effect will be large phase diameter
Court. How to correctly install the DC fan, please follow the following points:First. The air duct at the inlet and outlet of the fan is separately supported, and the overlapping weight of the duct is not allowed to be added to the parts of the fan; the horizontal position of the fan should be paid attention to when installing the fan, and the connection between the joint surface of the fan and the foundation and the air outlet duct should be adjusted to make it selfHowever, it is consistent and cannot be forcibly connected;
Second. The electric control box of the fan must match the corresponding fan (power, voltage, pneumatic mode, control mode, etc.).
Third. The fan wiring shall be connected by a professional electrician, and the wiring must be correct and reliable, especially the wiring number at the electric control box is consistent with the number on the fan terminal. The fan casing shall be reliably grounded, and the grounding must be reliable and cannot be replaced by zero.Grounding;
Third. After the fan is installed, move the impeller by hand or lever to check whether there is too much tightness or rubbing, whether there is any object that hinders the rotation, and if there is no abnormal phenomenon, the test run can be carried out. The exposed part of the fan transmission device should have a protective cover (from the user) If the fan air inlet is not connected to the pipe, a protective net or other installation device (provided by the user) shall also be added.
Fourth. After all the fans are installed, check the inside of the fan for any debris left over from the tool box.
Finally, it is to check all items and see if there is anything unusual after testing the machine. If everything is normal, it means perfect completion.
In addition to the above installation methods for DC fans, the heat dissipation of DC fans uses two installation methods: exhaust heat dissipation and blowing heat dissipation. The exhaust heat dissipation system has low noise and relatively small heat dissipation. The noise of the blowing heat dissipation system is relatively large. Large amount of heat dissipation,Fast, but easy to bring dust into the system, need outside protective net cover.
The above is the sharing of knowledge of DC cooling fan. Shenzhen Jiangshanlai Electronic Technology Co., Ltd. is a professional engaged in DC brushless motor, DC cooling fan, DC brushless fan, DC bracket fan, booster cooling fan, micro cooling fanDC cooling fan, DC blower, and non-standard fan customization, research and development, manufacturing, sales, service in one of the large enterprises, DC fan wholesale manufacturers, DC fan suppliers. Products sell well in Guangdong, Shenzhen, Guangzhou, Dongguan, Fujian, ZhejiangJiang, Jiangsu and other places.
If there is a need, you can consult us.
