Cooling fanAs an electronic parts industry that will not decline,
Cooling fanManufacturers are also everywhere, and the quality is of course uneven. We know that all kinds of equipment will be used in industrial production. These equipment will heat up and burn under long-term working conditions. At this time, it is necessary to use cooling fans to cool the equipment and keep the equipment in good working condition. If the temperature cannot be cooled in time, it may cause damage to internal parts and affect production work. This shows the importance of cooling fans in industrial production. So a high performance, good quality cooling fan is the pursuit of each enterprise. So how can we improve the quality of the cooling fan from the root?
1. equipment parts
The general cooling fan is mainly composed of rotor, stator, outer frame, motor (motor) four parts and other small parts. The quality of these equipment parts directly determines the normal operation of the cooling fan. Therefore, in order to improve the quality of the cooling fan, we must first start with these parts. Only parts with excellent quality can make the cooling fan have a longer service life and better heat dissipation effect.
2. Sector R & D
Usually a cooling fan before production, have to go through the department research and development of careful design and testing, to determine its various aspects of production requirements and adapt to market demand. For example, under the condition that the internal structural parts of the two cooling fans and the wind pressure speed are exactly the same, the outer frame of different shapes is used for testing. The outer frame with very good design can improve the performance of the fan by 20% compared with the fan with the general outer frame. Or consider and test the resistance and auxiliary force of various frame shapes to ventilation, how to minimize the bearing friction in the fan, how to do the chip to maximize the performance of the auxiliary fan and ensure the safety of the fan. This shows how important the research and development of a product is.
3. Production Department
After the design of the cooling fan is completed, it can be put into production. A good production department can improve the quality of the whole product by about 40%, and a good production department can improve the delivery speed and save the production cost. Such as soldering, a skilled solder can often avoid the defective rate of the fan and improve the stability of the fan to a large extent.
On how to improve the quality of the cooling fan from the root, I will share it here today. As can be seen from the above, if we want to improve the quality of the cooling fan, and equipment parts, research and development department and production department are inseparable, only in these three aspects to achieve close integration, in order to make our cooling fan quality greatly improved.
The above is how to improve from the root
Cooling fanQuality knowledge sharing.
Shenzhen Jiangshanlai Electronic Technology Co., Ltd., is a large-scale enterprise specializing in the customization, research and development, manufacturing, sales and service of DC brushless motors, DC cooling fans, DC brushless fans, DC bracket fans, supercharged cooling fans, micro cooling fans, DC blowers, and non-standard fans, DC fan wholesale manufacturers and DC fan suppliers. Products sell well in Guangdong, Shenzhen, Guangzhou, Dongguan, Fujian, Zhejiang, Jiangsu and other places.
If there is a need, you can consult us.
